Came home Friday to the new floor! Just in case you may have forgotten, this is what our bedroom looked like before...
and this is the same corner after...
Those horrible borders between rooms...
...are now gone:
It is honestly such a relief to get this DONE!
We came home to quite a mess Friday night. The floors looked perfect, but of course the rest of the house was in complete disarray. Dust all over the place, our mattress was downstairs in our living room, our clothes in the attic. Lots of miscellanea piled in the bathroom. We spent time on Friday night and Saturday putting furniture back, doing our laundry from the week, and touching up the paint on the bottom molding. I remade the bed with all new bedding that I was saving for such a transformation. It feels like a new house upstairs.
I attempted to get into that black-hole of projects today - the bathroom. Thought I would have the whole weekend to paint the room and settle on (and order!) a sink. No such luck. I managed to get some wood-filler in the little nail holes on the new trim, and used up my last bit of caulking in some other areas. But I ran out of caulking. No primer yet (much less paint!).
It seems everything takes a lot longer in real life than in my head. And after such a busy week, my head needed some rest, so I spent much of today napping. Whoops! Would you believe that in my wildest dreams, this weekend also included a shopping trip to Lowes, Marshalls, and Anthropologie? And also a day's-worth of backyard clean up with the hubster. HAHAHAHA. I somehow forget there are only so many hours in a day!
Sunday, April 18, 2010
Thursday, April 15, 2010
Sneak Peak
Sunday, April 11, 2010
Floor time
We are finally getting the second floor wood floors done this week!
Right now our bedroom floor looks ok, but it has an orange-y sheen that just isn't doing it for me:

Then there is our guest bedroom floor, which looks it might have, at one time, been a nice, finished floor, but now looks a little sorry:

Last comes our third bedroom, a grimy old mess:


It also doesn't help that the thresholds between all the rooms have been long gone, leaving behind a rainbow of wood finishes in each doorway:
The guest bedroom and third bedroom both had carpeting when we moved in. Our floor guy reassured us that the grimy mess left underneath the carpeting actually protected the wood floor from wear and tear and therefore will make for an easy sanding and refinishing.
So unlike the first floor, which received heavy foot traffic over the past 80 years, and required a new layer of oak (here and here), our second floor should be a much less invasive procedure.
It is kind of painful to have to pack everything up and move out of our bedroom for the next few days, but I think it will be well worth it! Will update with "after" pictures as soon as I can!
Right now our bedroom floor looks ok, but it has an orange-y sheen that just isn't doing it for me:
It also doesn't help that the thresholds between all the rooms have been long gone, leaving behind a rainbow of wood finishes in each doorway:
The guest bedroom and third bedroom both had carpeting when we moved in. Our floor guy reassured us that the grimy mess left underneath the carpeting actually protected the wood floor from wear and tear and therefore will make for an easy sanding and refinishing.So unlike the first floor, which received heavy foot traffic over the past 80 years, and required a new layer of oak (here and here), our second floor should be a much less invasive procedure.
It is kind of painful to have to pack everything up and move out of our bedroom for the next few days, but I think it will be well worth it! Will update with "after" pictures as soon as I can!
Friday, April 9, 2010
We interrupt our regular schedule...
...to bring you a public service announcement:
Antibacterial soaps and cleaners are bad. period. Please read the article from EDF here.
Article via slowlovelife. Thanks for the heads up!
Antibacterial soaps and cleaners are bad. period. Please read the article from EDF here.
Article via slowlovelife. Thanks for the heads up!
Tuesday, April 6, 2010
In the Navy
Spent the better part of yesterday painting the guest room walls...

I have to say, the navy has completely transformed the room:

Wall paint is Benjamin Moore Aura "Kensington Blue" (Matte finish), ceiling and trim is Ben Decorator's White.
The closet/shelving area took an especially long amount of time to fix and paint, you can read more about that transformation here.
A reminder of how the room looked when we first moved in:
I can't tell you the relief I felt as I was painting over those leaves:

Next week the floors are being refinished - can not wait!
I have to say, the navy has completely transformed the room:
Wall paint is Benjamin Moore Aura "Kensington Blue" (Matte finish), ceiling and trim is Ben Decorator's White.The closet/shelving area took an especially long amount of time to fix and paint, you can read more about that transformation here.
A reminder of how the room looked when we first moved in:
I can't tell you the relief I felt as I was painting over those leaves:

Monday, April 5, 2010
Easter 2010
Friday, April 2, 2010
The Doors - Part 2 - Demystifying the knob
I've already talked about our upstairs hallway here.
But we still needed to do lots more. For one, the door plates were all crudded up with paint like this:
Secondly, most of the doors in the hallway had only one coat of paint, or no paint, or only one side painted.
So I decided it was time to demystify the doorknob situation. I've been avoiding them like the plague since we took on the house. Hubby was in charge of the locks and doorknobs on the outside doors. Now it was my turn to face the music...
As it turns out, the main thing is - magically - just to unscrew everything!
At this point it's important to remember to put all the tiny screws in a "safe place" (i.e. in a container away from the work area, and flailing arms)

After removing the all this hardware, I ended up with a semi-flat surface:

Did a quick once-over sand to get rid of some of the old paint crud:

And painted the doors - both sides this time - with one or two coats of paint:

In the meantime, I took all the doorplates and lined them up in an old metal tray on the stove:

Boiled some water, poured it over and let it soak for an hour or so while I was upstairs painting the doors:

Then I ran each plate under hot water while I scrubbed the paint off with a nylon bristle brush - sometimes I had to use my finger nail too:
(Disclaimer: I was lucky that the paint was only around the outside edge and therefore pretty easy to remove. But I can imagine there is hardware out there that have many layers of old paint in all the fine grooves and to remove that might take a little more effort - I researched online and some go as far as to let their hardware cook overnight in a slow cooker.)
After all was dry, I was left with a clean set of doorplates:
I'm sure there are ways to polish the pieces, but I liked the old patina, so didn't go any further with it.
Now I was left to put everything back - this is where I am thankful to have put all those little screws in one safe place (and I also realize that by pointing this out I am turning into a mini-me of my parents).

Clean lines! So much better!

So now I can sleep easier, knowing that 5.5 of our 7 doors upstairs are freshly painted, clean and matching, and with views like this:
It makes a big difference!
But we still needed to do lots more. For one, the door plates were all crudded up with paint like this:
Secondly, most of the doors in the hallway had only one coat of paint, or no paint, or only one side painted.
So I decided it was time to demystify the doorknob situation. I've been avoiding them like the plague since we took on the house. Hubby was in charge of the locks and doorknobs on the outside doors. Now it was my turn to face the music...
As it turns out, the main thing is - magically - just to unscrew everything!
At this point it's important to remember to put all the tiny screws in a "safe place" (i.e. in a container away from the work area, and flailing arms)
After removing the all this hardware, I ended up with a semi-flat surface:
Did a quick once-over sand to get rid of some of the old paint crud:

And painted the doors - both sides this time - with one or two coats of paint:
In the meantime, I took all the doorplates and lined them up in an old metal tray on the stove:
Boiled some water, poured it over and let it soak for an hour or so while I was upstairs painting the doors:
Then I ran each plate under hot water while I scrubbed the paint off with a nylon bristle brush - sometimes I had to use my finger nail too:
After all was dry, I was left with a clean set of doorplates:
Now I was left to put everything back - this is where I am thankful to have put all those little screws in one safe place (and I also realize that by pointing this out I am turning into a mini-me of my parents).
Clean lines! So much better!
So now I can sleep easier, knowing that 5.5 of our 7 doors upstairs are freshly painted, clean and matching, and with views like this:
It makes a big difference!
Subscribe to:
Posts (Atom)




